[Main function of wiring terminal]: Industrial control abstract: Wiring terminal is used to facilitate the connection of wires. In fact, it is a piece of metal sheet sealed in insulating plastic. There are holes at both ends to insert wires. There are screws for tightening or loosening, such as two wires. Sometimes they need to be connected and sometimes they need to be disconnected. At this time, they can be put into use terminals.

Industrial control abstract: Terminals are used to facilitate the connection of wires. In fact, they are a piece of metal sheet sealed in insulating plastic. There are holes at both ends to insert wires. Screws are used to fasten or loosen wires, such as two wires. Sometimes they need to be connected, sometimes they need to be disconnected. At this time, terminals can be used to connect them, and they can be disconnected at any time, but not at any time. They must be welded or twisted together, which is very convenient and fast.

And suitable for a large number of wires interconnection, in the power industry there are special terminal row, terminal box, above all are wiring terminals, single-layer, double-layer, current, voltage, ordinary, breakable and so on. A certain area of crimping is used to ensure reliable contact and sufficient current.